MIC-ZG is an international OEM manufacturer. We are ready for factory audits and video calls at any time.
From design to production. We provide feasibility analyses, market research and trial launch for each injection mold. We are committed to helping customers win the market in a real sense, rather than simply OEM plastic production. We will customize at least 3 solutions and offer you a $500 discount on your first mold.
Confidentiality Agreement | Collaborative Office Systems | Videoconferencing | Fabrication in China | Win of the market | A stable supply
| Name | Code Name | commonly used models | Material thickness | Material length | Material width | Material properties |
Stainless Steel Plate/Sheet |
SUS，STAINLESS STEEL | SUS304（18-8stainless steel，no magnetic）SUS301（spring stainless steel，weakly magnetic） SUS430（magnetic，relatively easy to rust） | 0.1~10.0mm | Can be cut to any size as required. Generally 8', which is 2438mm or 2500mm. | The maximum width is 5' (1524mm), generally 4', that is, 1219mm or 1250mm, and can be cut to any size less than 1524mm as required. | 1. Metallic white luster, the surface is not easy to rust, and can be divided according to the surface state: matte surface, bright surface, mirror surface, brushed surface, etc. In order to protect the surface, PVC protective film is often attached. 2. generally do not do surface treatment. For baking paint, special surface treatment is required. 3. It is not suitable for electroplating, but electrolysis can be used. 4. Suitable for refrigeration, air conditioners, home appliances and decorative structural parts. Specific Gravity: 7.95 |
| Cold-Roll Steel/ Sheet | COLD ROLLING STEEL | SPCC, CRS (SPCD: cold plate for drawing, SPCE cold plate for deep drawing.) | 0.25~3.2mm | Can be cut to any size as required. Generally 8' or 2438mm or 2500mm | The maximum width is 5' (1524mm), generally 4' or 1219mm or 1250mm, and can be cut to any size less than 1524mm as needed. | 1. Iron gray luster, the surface is easy to be scratched and rusted, and attention must be paid to protection and quick sequence during processing. 2. It is suitable for electroplating (colorful zinc plating, white zinc plating, nickel plating, tin plating...), baking paint, powder spraying... and other workpieces. Specific gravity: 7.85. 3. The general tolerance of material thickness is +0, -0.08, that is, the actual measurement of plate thickness 2.0mm may only be 1.92mm. |
| Aluminium Plate/Sheet | ALUMINUM | A1100P-O (O stands for soft material, no hardness), A1050P A5052H32P, AL6061T6, AL6063T5… | 0.3~20mm | Can be cut to any size as required. Generally 8', which is 2438mm or 2500mm. | The maximum width is 5' (1524mm), generally 4', that is, 1219mm or 1250mm, and can be cut to any size less than 1524mm as required. | 1. Metallic white luster, the surface is easy to be oxidized and corroded, so the surface is often affixed with PVC protective film. 2. Surface treatment: It can be sandblasted, brushed, or polished first, and then anodized (non-conductive, can be dyed in various colors); chromate oxidation (also known as conductive oxidation, with primary color and golden yellow). Specific gravity: 2.75 |
| Hot-dip Galvanized Steel Sheet | SPGC | 0.4~3.2mm | Can be cut to any size as required. Generally 8', which is 2438mm or 2500mm. | The maximum width is 5' (1524mm), generally 4', that is, 1219mm or 1250mm, and can be cut to any size less than 1524mm as required. | 1. The metal has a white luster with patterns on it, and the surface is not easy to rust, but white rust spots will occur due to corrosion. 2. Generally, no surface treatment is required. 3. Can not do electroplating (colorful zinc plating, white zinc plating, nickel plating, tin plating...). 4. It is suitable for refrigeration, air conditioning, heavy motor and roof structural parts. Specific Gravity: 8.25 |
|
| Hot-rolled Steel Plate/Sheet | HOT ROLLING STEEL | SPHC, HRS | 1.4~6.0mm. Material code above 6mm is SS41 | Can be cut to any size as required. Generally 8' or 2438mm or 2500mm. | The maximum width is 5' (1524mm), generally 4' or 1219mm or 1250mm, and can be cut to any size less than 1524mm as required. | 1. Black-gray luster, the surface is not easy to be scratched, but easy to rust, which must be removed during processing. 2. It is not suitable for electroplating (colorful zinc plating, white zinc plating, nickel plating, tin plating...). 3. It is suitable for structural parts such as baking paint and powder spraying. Specific gravity: 7.85 |
| Copper Plate/Sheet | COPPER | C1020, C1100, C2100, 2200, 2300, 2400 (below copper) C2600 and above are brass. C1020P-O (O stands for soft material, no hardness), C1020P-1/2H (Vickers hardness HV75～120) | 0.3mm or more | Generally 5', which is 1524mm. | Generally, it is 2', that is, 610mm. If it exceeds, it must be customized. | 1, #1xxx copper content copper content 99.9%, (also known as electrolytic copper or confluence copper) excellent electrical and thermal conductivity, good drawing processability, good weldability, corrosion resistance, weather resistance, metallic red luster 。Suitable for electrical and chemical industries. #2xxx contains 60 to 96% copper, (also known as brass or confluence copper) ductility, processability, and electroplating properties are commonly used in wiring equipment, instrument panels, bullet casings, etc. 2. Surface treatment: it can be drawn first, or polished and then pickled, copper-plated, tin-plated, and nickel-plated. Specific gravity: 8.9 |
| Others： | |
| Cold-rolled Common Sheet Steel | GB（Q195、Q215、Q235、Q275） JIS(SPCC、SPCD、SPCE) |
| Continuous electro-galvanized sheet steel | GB（DX1、DX2、DX3、DX4） JIS(SECC、SECD、SECE) |
| Continuous hot-dip galvanized steel sheet | GB（Zn100-PT、Zn200-SC、Zn275-JY） JIS(SGCC、SGCD1、SGCD2、SGCD3) |
| Stainless Steel Plate/Sheet | JIS(SUS) |
| Aluminium Plate/Sheet | 3A21(LF21) 、5A02(LF2) 、2A06(LY6) |
| Copper Plate | T1﹑T2﹑T3 |
| Brass Plate | H59﹑H62﹑H70 |
